PVC deck cost calculator

A 20x20 pvc deck is 400 square feet and costs $13,020 to $17,620 installed at national-average rates, about $38.30 per square foot all-in. The same 400 square feet in pressure-treated pine, the standard benchmark, runs $9,210 to $12,460. Both totals include framing, railing, a short flight of stairs, hardware, permit and labor, and both move by up to 35% once your state's labor rate is applied.

A 16x20 pvc deck is 320 square feet and costs $10,800 to $14,610 installed, or roughly $39.69 per square foot. The surface alone takes about 50 16-foot boards including waste, at $11 per square foot for the boards, $3,520 before framing, railing or labor.

A 14x20 pvc deck is 280 square feet and costs $9,680 to $13,100 installed. Dropping from a 16x20 to a 14x20 removes 40 square feet but only about $1,309 of cost, because the permit, the ledger connection and the stairs are fixed no matter how large the deck is. Per square foot the smaller deck is actually slightly more expensive at $40.69 against $39.69.

The decking boards, at about 25% of the installed total on a 192-square-foot pvc deck, $2,112 of $8,427. Railing is next at $1,470. The substructure (joists, beams, posts and footings) accounts for roughly 11% of the total and is invisible the moment the deck is finished. Taking the railing off drops the project by $1,470, about 17%, which makes it the easiest place to trade down. Across the whole job, installation labor is 40-50% of what you pay.

Divide the deck area by the coverage of one board. A 16-foot board 5.5 inches wide covers 7.3 square feet, so a 320 square foot deck needs 44 boards on paper and about 50 ordered, once the 12% cut-and-damage allowance is added. For a 400 square foot deck that becomes 62 boards. Diagonal decking adds roughly 15% on top of that, because every board meets the joists at an angle and every cut is a waste piece.

A pvc deck lasts 30+ years. Maintenance requirement: rinse occasionally; nothing else. Across that service life the 192-square-foot deck above works out to roughly $259 per year against $502 for pressure-treated pine, which is a fairer comparison between materials than the upfront price. The substructure usually outlives the surface, so a resurfacing at year 15 or 20 is a real option on a well-built frame.

Poolside decks, coastal properties, and anywhere moisture exposure is constant. Advantages: Contains no wood flour at all, so it cannot rot or grow mold; Lightest decking material, which reduces framing load; Best choice for poolside and saltwater exposure. Drawbacks: Highest cost of the mainstream low-maintenance options; Expands and contracts more than composite, so gapping is critical; Can look and sound more like plastic underfoot. Against pressure-treated pine, the standard benchmark, this deck costs about $2,154 more upfront, or $259 per year of service against $502.

Yes, this is a realistic DIY project for someone comfortable with framing. A DIY build costs about $6,615 against $8,427 installed, saving roughly $1,812. Budget three to four weekends, and check every corner with the 3-4-5 rule before fastening. The ledger attachment to the house is the one detail worth having inspected regardless of who builds it.

More than most people expect. The deck above uses 42 linear feet of railing; removing it entirely drops the total from $8,427 to $6,957, a difference of $1,470, or about 17% of the project. Railing is priced per linear foot and is independent of decking choice, so it is the easiest place to trade down. Code requires it above 30 inches of drop in most jurisdictions, so a ground-level deck can skip it entirely.

Substantially, because height changes the substructure rather than the surface. Ground level is the baseline; 2 to 4 feet adds about 10%, 4 to 8 feet about 25%, and over 8 feet about 45%. The same deck costs $8,063 at ground level and $9,700 above 8 feet. Height also triggers the railing requirement and, past 30 inches, the permit in most jurisdictions.

A residential deck is engineered to carry 50 lbs per square foot: 40 psf of live load for people and furniture, plus 10 psf of dead load for the structure's own weight, under IRC Table R301.5. On a 12x12 deck that is 5,760 lbs of people and belongings against a 7,200 lb total design load, and on a 16x20 deck 12,800 lbs of live load. Those numbers only hold if the framing was built to match: joist size and spacing, beam span, post size and footing bearing all have to carry it, and the ledger connection to the house is the component that actually fails. A hot tub is the common trap, filled and occupied it concentrates 100 psf or more in one spot, and it needs framing designed for it rather than a standard deck.

The 3-4-5 rule is how builders check that a corner is square before anything is fastened down. Measure 3 feet along one edge, 4 feet along the edge meeting it, and the diagonal between those two marks should be exactly 5 feet, if it is longer the corner is open, if it is shorter the corner is closed. It is the Pythagorean theorem used as a site tool, and it scales: 6-8-10 or 9-12-15 give a more accurate result on a large deck because the error is spread over a longer measurement. Check the ledger and the outer beam this way before you set a single joist, because a frame that is out of square puts every deck board out of parallel with the house.