Aluminum fence cost calculator

How much does a aluminum fence cost?

A 150-foot, 6-foot-tall aluminum ornamental fence costs $5,920 to $8,010 installed at national-average labor rates, or roughly $46.43 per linear foot. Material alone accounts for about $25 per foot, with installed labor adding around $14 per foot before regional adjustment. The aluminum fence calculator above itemizes every one of those lines rather than returning a single per-foot number.

Across the whole material set, chain-link is the cheapest option upfront at $3,508 for the same fence. Measured over expected service life instead, chain-link comes out ahead at $156 per year. Aluminum runs $214 per year over its 30+ years lifespan.

Posts sit 8 feet apart, so a 150-foot run needs 20 posts and about 40 bags of concrete. Post spacing is one of the quieter cost drivers between materials. Chain-link's 10-foot spacing means meaningfully fewer holes to dig than the 8-foot spacing every other material uses.

Is aluminum the right choice?

Best for: Pool enclosures, front yards, and anywhere the fence should define a boundary without blocking the view.

What works: Will never rust, unlike wrought iron; Powder-coated finish lasts decades without refinishing; Follows sloped ground better than panel systems; Meets most pool-barrier codes without modification.

What does not: No privacy. It is a boundary marker, not a screen; Dents on hard impact and is awkward to repair; Costs roughly twice what wood does upfront; Limited to picket styles.

Maintenance is the line people forget. Aluminum needs: none; powder coat does not need refinishing. Over a 30+ years service life, that is a recurring cost in either money or weekends, and it belongs in any honest comparison against a higher upfront price.

Aluminum fence cost by state

Labor is roughly half of an installed fence, so the same aluminum fence varies by more than 50% across the country. In Mississippi, the cheapest labor market in the US, the 150-foot fence above costs $6,407. In Hawaii, the most expensive, the identical fence costs $7,744.

Frost depth compounds that gap. A aluminum fence in Minnesota needs posts set 60 inches deep; the same fence in Florida needs no frost allowance at all. That difference alone is several hundred dollars of concrete and labor on a typical residential run. Select your state in the calculator above to apply both adjustments.

Aluminum fence styles and heights

Aluminum is manufactured as an ornamental picket section rather than a solid screen, so this material does not give you a privacy fence at any height. At 4 feet, the usual picket height and the one most pool barrier codes are written around, 150 feet costs about $5,966. If screening is what you actually need, the honest comparison is wood or vinyl at 6 feet, priced on their own pages.

Style matters less for aluminum than it does for wood, where board on board, shadowbox and butted panels all price differently. Aluminum arrives as a manufactured panel or section, so the meaningful choices are height, color and picket spacing rather than how the boards are hung.

Whichever style you land on, the posts, gates, corners and permit are unchanged, which is why a style decision moves the total far less than a material or height decision does.

How we calculated these estimates

Every figure on this page comes from the same open formula the calculator above uses. We start from a 2026 national baseline for materials and installed labor, apply the state labor multiplier published by the Bureau of Labor Statistics for construction trades, then add the line items your inputs call for: gates, corners, removal, permits and a waste allowance. Nothing is hidden behind a lead form, and no contractor pays us to appear here. The result is a planning range, not a quote. The low figure assumes straightforward access and an efficient crew, and the high figure assumes obstacles, difficult access, or premium material grades.