Fence cost calculator for Virginia

How much does a fence cost in Virginia?

A standard 150-foot, 6-foot-tall wood privacy fence in Virginia runs $4,060 to $5,490 professionally installed, or about $31.85 per linear foot. The same fence in vinyl comes to $4,830 to $6,540. Chain-link, the cheapest way to enclose the same perimeter, lands at $2,870 to $3,880.

Virginia construction labor runs about 2% below the national average, which puts it close to the middle of the pack among US labor markets. That single multiplier moves the wood fence estimate down by roughly $192 compared with a national-average install of the identical fence. Labor is 45-55% of a professionally installed fence, so the multiplier matters more than any material decision you make.

Doing the work yourself removes the labor line entirely. On the 150-foot wood fence above, a DIY install in Virginia comes to roughly $2,885 for materials, concrete, a tool rental allowance and the permit. That is a real saving, but post setting is genuinely hard work, and a fence that is out of plumb is expensive to correct.

Virginia soil, climate and frost depth

Virginia has a moderate 18-inch frost depth. Posts must be set below the frost line or seasonal freeze-thaw will lift them out of plumb. That is the most common reason a fence fails early, and it is entirely avoidable at install time.

Ground conditions here are clay in the Piedmont, sandy soils in the Tidewater region. Combined with a climate that is moderate, with humid summers and cold-but-manageable winters, the practical effect is straightforward: Northern Virginia labor runs well above the statewide multiplier because of the DC metro market, so treat the state figure as a floor there.

The material most commonly installed across Virginia is wood privacy, which reflects both the local climate and what contractors here stock and know how to install well. Choosing outside the local norm is entirely reasonable, but expect a smaller pool of experienced installers and a slightly higher quote.

Fence permits in Virginia

Virginia enforces a statewide Uniform Statewide Building Code. Permits are required for fences over 6 feet and for decks over 16 inches above grade, which is a lower threshold than most states.

Our estimate includes $123 as a permit allowance, scaled to Virginia fee levels. Actual fees vary widely between municipalities, and some rural counties charge nothing at all. Before you buy material, call your local building department and confirm three things: the height limit for your yard, the required setback from the property line, and whether a survey is required.

If your property is in an HOA, that review is usually the stricter gate. HOA design rules routinely restrict material, color and height beyond what the municipality requires, and approval can take several weeks.

Which fence material lasts longest in Virginia?

Upfront price and lifetime cost rank differently. Spread across expected service life, the 150-foot fence above costs $273 per year in wood, $207 per year in vinyl, and $150 per year in chain-link. Vinyl costs noticeably more on day one and less over twenty years, and that comparison does not even count the stain and sealer a wood fence needs every two to three years.

For Virginia conditions specifically: Northern Virginia labor runs well above the statewide multiplier because of the DC metro market, so treat the state figure as a floor there. Weigh that against how long you plan to stay. If you are moving inside five years, upfront cost is the number that matters. If this is a long-term house, lifetime cost is the honest comparison.

Privacy, picket and board on board fence costs in Virginia

Style changes the lumber bill without changing the posts, and it is where a lot of Virginia quotes diverge from each other. A solid 6-foot privacy fence, the default in the privacy fence calculator above, costs $4,778 across 150 feet here. A 4-foot picket fence in the same wood costs about $3,516, because spaced pickets leave roughly a third of the panel face open and the shorter posts need less concrete.

Board on board sits at the other end. Overlapping every board so no gap opens as the lumber dries takes about 35% more material than a flat side-by-side panel, which brings the same 150-foot Virginia fence to roughly $5,471. That is about $693 more than the standard privacy build. Whether that premium is worth paying here comes down to the local climate. Northern Virginia labor runs well above the statewide multiplier because of the DC metro market, so treat the state figure as a floor there.

To price any of these, set the calculator to wood at your height and length. It returns the solid-panel figure, and the two adjustments above bracket the picket and board on board versions of the same run.

How we calculated these estimates

Every figure on this page comes from the same open formula the calculator above uses. We start from a 2026 national baseline for materials and installed labor, apply the state labor multiplier published by the Bureau of Labor Statistics for construction trades, then add the line items your inputs call for: gates, corners, removal, permits and a waste allowance. Nothing is hidden behind a lead form, and no contractor pays us to appear here. The result is a planning range, not a quote. The low figure assumes straightforward access and an efficient crew, and the high figure assumes obstacles, difficult access, or premium material grades.